Exposure to outdoor ambient air toxics and risk of breast cancer: The multiethnic cohort.

BACKGROUND: A growing literature has reported associations between traffic-related air pollution and breast cancer, however there are fewer investigations into specific ambient agents and any putative risk of breast cancer development, particularly studies occurring in populations residing in higher pollution areas such as Los Angeles. OBJECTIVES: To estimate breast cancer risks related to ambient air toxics exposure at residential addresses. METHODS: We examined the relationships between ambient air toxics and breast cancer risk in the Multiethnic Cohort among 48,665 California female participants followed for cancer from 2003 through 2013. We obtained exposure data on chemicals acting as endocrine disruptors or mammary gland carcinogens from the National-Scale Air Toxics Assessment. Cox proportional hazards models were used to estimate breast cancer risk per one interquartile range (IQR) increase in air toxics exposure lagged by 5-years. Stratified analyses were conducted by race, ethnicity, and hormone receptor types. RESULTS: Among all women, increased risks of invasive breast cancer were observed with toxicants related to industries [1,1,2,2-tetrachloroethane (hazard ratio [HR] = 4.22, 95% confidence interval [95% CI] 3.18-5.60), ethylene dichloride (HR = 2.81, 95% CI 2.20-3.59), and vinyl chloride (HR = 2.27, 95% CI 1.81, 2.85); these 3 agents were correlated (r2 = 0.45-0.77)]. Agents related to gasoline production or combustion were related to increased breast cancer risk [benzene (HR = 1.32, 95% CI 1.24, 1.41), ethylbenzene (HR = 1.20, 95% CI 1.13-1.28), toluene (HR = 1.29, 95% CI 1.20-1.38), naphthalene (HR = 1.11, 95% CI 1.02-2.22), acrolein (HR = 2.26, 95% CI 1.92, 2.65)]. Higher hazard ratios were observed in African Americans and Whites compared to other racial and ethnic groups (p-heterogeneity <0.05 for traffic-related air toxics, acrolein, and vinyl acetate). CONCLUSIONS: Our findings suggest that specific toxic air pollutants may be associated with increase breast cancer risk.

Boosting Photothermocatalytic Oxidation of Toluene Over Pt/N-TiO2: The Gear Effect of Light and Heat.

Photothermal catalysis is extremely promising for the removal of various indoor pollutants owing to its photothermal synergistic effect, while the low light utilization efficiency and unclear catalytic synergistic mechanism hinder its practical applications. Here, nitrogen atoms are introduced, and Pt nanoparticles are loaded on TiO2 to construct Pt/N-TiO2-H2, which exhibits 3.5-fold higher toluene conversion rate than the pure TiO2. Compared to both photocatalytic and thermocatalytic processes, Pt/N-TiO2-H2 exhibited remarkable performance and stability in the photothermocatalytic oxidation of toluene, achieving 98.4% conversion and 98.3% CO2 yield under a light intensity of 260 mW cm-2. Furthermore, Pt/N-TiO2-H2 demonstrated potential practical applicability in the photothermocatalytic elimination of various indoor volatile organic compounds. The synergistic effect occurs as thermocatalysis accelerates the accumulation of carboxylate species and the degradation of aldehyde species, while photocatalysis promotes the generation of aldehyde species and the consumption of carboxylate species. This ultimately enhances the photothermocatalytic process. The photothermal synergistic effect involves the specific conversion of intermediates through the interplay of light and heat, providing novel insights for the design of photothermocatalytic materials and the understanding of photothermal mechanisms.

Mesoporous Silica MCM-41 from Fly Ash as a Support of Bimetallic Cu/Mn Catalysts for Toluene Combustion.

The main outcome of this research was to demonstrate the opportunity to obtain a stable and well-ordered structure of MCM-41 synthesized from fly ash. A series of bimetallic (Cu/Mn) catalysts supported at MCM-41 were prepared via grinding method and investigated in catalytic toluene combustion reaction to show the material's potential application. It was proved, that the Cu/Mn ratio had a crucial effect on the catalytic activity of prepared materials. The best catalytic performance was achieved with sample Cu/Mn(2.5/2.5), for which the temperature of 50% toluene conversion was found to be 300 °C. This value remains in line with the literature reports, for which comparable catalytic activity was attained for 3-fold higher metal loadings. Time-on-stream experiment proved the thermal stability of the investigated catalyst Cu/Mn(2.5/2.5). The obtained results bring a valuable background in the field of fly ash utilization, where fly ash-derived MCM-41 can be considered as efficient and stable support for dispersion of active phase for catalyst preparation.

The effects of metal-oxide content in MnO2-activated carbon composites on reactive adsorption and catalytic oxidation of formaldehyde and toluene in air.

The deterioration in air quality caused by volatile organic compounds (VOCs) has become an important environmental issue. Here, activated carbon (AC) composites with manganese oxide (MnO2: 1 % to 50 %) are synthesized as MAC for the removal of formaldehyde (FA) and toluene in air through a combination of reactive adsorption and catalytic oxidation (RACO) at room temperature (RT). The best-performing composite (MAC-20: 20 % of MnO2) exhibits a 10 % breakthrough volume (BTV10%) of FA and toluene at 41.2 and 377 L g-1, respectively while realizing complete oxidation of FA and toluene into carbon dioxide (CO2) at 100 °C and 275 °C, respectively. The reaction kinetic rates (r) for 10 % removal efficiency of FA and toluene (XFA or T) at RT are estimated as 9.82E-02 and 3.20E-02 mmol g-1 h-1, respectively. The high performance of MAC-20 can be attributed to its enriched adsorption capacity of oxygen vacancy (OV) and the presence of adsorbed oxygen (OA), as shown by an Mn3+/Mn4+ ratio of 0.729 and an OA/lattice­oxygen (OL) ratio of 1.50. The results of this study highlight the interactive roles of oxygen abundance and temperature in the generation of distinctive oxidation patterns for FA in reference to toluene. This study is expected to offer practical guidance for the implementation of RACO against diverse VOCs for efficient management of air quality.

Enhancement Effect Induced by the Second Metal to Promote Ozone Catalytic Oxidation of VOCs.

It is a promising research direction to develop catalysts with high stability and ozone utilization for low-temperature ozone catalytic oxidation of VOCs. While bimetallic catalysts exhibit excellent catalytic activity compared with conventional single noble metal catalysts, limited success has been achieved in the influence of the bimetallic effect on the stability and ozone utilization of metal catalysts. Herein, it is necessary to systematically study the enhancement effect in the ozone catalytic reaction induced by the second metal. With a simple continuous impregnation method, a platinum-cerium bimetallic catalyst is prepared. Also highlighted are studies from several aspects of the contribution of the second metal (Ce) to the stability and ozone utilization of the catalysts, including the "electronic effect" and "geometric effect". The synergistic removal rate of toluene and ozone is nearly 100% at 30 °C, and it still shows positive stability after high humidity and a long reaction time. More importantly, the instructive significance, which is the in-depth knowledge of enhanced catalytic mechanism of bimetallic catalysts resulting from a second metal, is provided by this work.

Unveiling the activity difference cause and ring-opening reaction routes of typical radicals induced degradation of toluene.

This study employs five UV-AOPs (PMS, PDS, H2O2, NaClO and NaClO2) to produce radicals (•OH, SO4•-, ClO•, O2•- and 1O2) and further comparatively studies their activity sequence and activity difference cause in toluene degradation. The toluene mineralization efficiency as a descending order is 73 % (UV-PMS) > 71 % (UV-PDS) > 70 % (acidified-UV-NaClO) > 55 % (UV-H2O2) > 36 % (UV-NaClO) > 35 % (UV-NaClO2); that of conversion efficiency is 99 % (acidified-UV-NaClO) > 95 % (UV-PMS) > 90 % (UV-PDS) > 74 % (UV-H2O2) > 44 % (UV-NaClO) > 41 % (UV-NaClO2). Acidic pretreatment significantly boosts the reactivity of UV-NaClO. ESR combined with radical quenching tests reveals the radicals' generation and evolution, and their contribution rates to toluene conversion, i.e. ClO• > SO4•- > O2•- > 1O2 > â€¢OH. Theoretical calculations further unveil the ring-opening reaction routes and the nature of the activity difference of different radicals. The minimum energy required for ring-opening reaction is 116.77, 150.63, 168.29 and 191.92 kJ/mol with respect to ClO•, SO4•-, 1O2 and •OH, and finding that the ClO•-HO• pair is the best for toluene mineralization. The difficulty for eliminating typical VOCs by using UV-AOPs method is determined as toluene > chlorobenzene > benzene > ethyl acetate.

Ni-FeOx synergy induced by metal-support interaction on Ni-impregnated incineration bottom ash for effective tar reforming.

The incineration bottom ash (IBA) was impregnated with nickel to catalyze toluene (tar surrogate) steam reforming. A toluene conversion of >80 % was achieved at 800℃ without activity decay in a 100-h test for 15 %Ni/IBA. An activation stage was observed for Ni/IBA catalysts in the initial 50 âˆ¼ 400 min under different reaction conditions. A series of experiments and characterizations were performed to explore the possible mechanisms for the activation. It was found that the iron species in IBA gradually migrated to the catalyst surface and formed a Ni-FeOx complex owing to the metal-support interaction. The synergy of Ni-FeOx played an important role in improving the activity of Ni/IBA due to the enhanced lattice oxygen activity. Additionally, Ni/IBA catalysts showed a much lower coke deposition rate than Ni/Al2O3 (1.12 vs. 3.45 mg-C/gcat∙h) because of the variable states of FeOx and the abundant basic sites caused by the alkali and alkaline earth metals contained in IBA.

Highly Sensitive and Selective Toluene Gas Sensors Based on ZnO Nanoflowers Decorated with Bimetallic AuPt.

Efficient sensors for toluene detecting are urgently needed to meet people's growing demands for both environment and personal health. Metal oxide semiconductor (MOS)-based sensors have become brilliant candidates for the detection of toluene because of their superior performance over gas sensing. However, gas sensors based on pure MOS have certain limitations in selectivity, operating temperature, and long-term stability, which hinders their further practical applications. Noble metals (including Ag, Au, Pt, Pd, etc.) have the ability to enhance the performance of MOS-based sensors via surface functionalization. Herein, ZnO nanoflowers (ZNFs) modified with bimetallic AuPt are prepared for toluene detection through hydrothermal method. The response of a AuPt@ZNF-based gas sensor can reach 69.7 at 175 °C, which is 30 times, 9 times, and 10 times higher than that of the original ZNFs, Au@ZNFs, and Pt@ZNFs, respectively. Furthermore, the sensor also has a lower optimal operating temperature (175 °C), good stability (94% of previous response after one month), and high selectivity towards toluene, which is the result of the combined influence of the electronic and chemical sensitization of noble metals, as well as the unique synergistic effect of the AuPt alloy. In summary, AuPt@ZNF-based sensors can be further applied in toluene detection in practical applications.

Tuning the crystallinity of the MnOx catalysts to promote toluene catalytic oxidation.

In this paper, the MnOx catalysts with excellent toluene oxidation performance were prepared by a simple precipitation method. The physicochemical properties of the prepared MnOx catalysts were investigated by XRD, BET, H2-TPR, O2-TPD and XPS. The obtained results revealed that the crystallinity of the prepared MnOx catalysts could be effectively regulated by changing the (NH4)2CO3/Mn(NO3)2 molar ratio, and thus affecting the oxygen vacancy concentration of the prepared MnOx catalysts. The prepared MnOx-4 catalyst with the (NH4)2CO3/Mn(NO3)2 molar ratio of 4.0 had the poor crystallinity and small grain size, which effectively promoted the oxygen defects in the MnOx catalyst to be formed. At the same time, the MnOx-4 catalyst had a large specific surface area, the highest low temperature reducibility and the largest number of oxygen vacancies and surface adsorbed oxygen species, which allowed more surface oxygen species to participate in the redox reaction, and promoted the toluene deep oxidation. Therefore, when the (NH4)2CO3/Mn(NO3)2 molar ratio was 4.0, the prepared MnOx-4 catalyst exhibited an excellent toluene catalytic oxidation performance and robust catalytic stability. What's more, the toluene oxidation conversion on the MnOx-4 catalyst reached 99% at 230°C, and the MnOx-4 catalyst showed excellent resistance to water vapour.

Anaerobic treatment of groundwater co-contaminated by toluene and copper in a single chamber bioelectrochemical system.

Addressing the simultaneous removal of multiple coexisting groundwater contaminants poses a significant challenge, primarily because of their different physicochemical properties. Indeed, different chemical compounds may necessitate establishing distinct, and sometimes conflicting, (bio)degradation and/or removal pathways. In this work, we investigated the concomitant anaerobic treatment of toluene and copper in a single-chamber bioelectrochemical cell with a potential difference of 1 V applied between the anode and the cathode. As a result, the electric current generated by the bioelectrocatalytic oxidation of toluene at the anode caused the abiotic reduction and precipitation of copper at the cathode, until the complete removal of both contaminants was achieved. Open circuit potential (OCP) experiments confirmed that the removal of copper and toluene was primarily associated with polarization. Analogously, abiotic experiments, at an applied potential of 1 V, confirmed that neither toluene was oxidized nor copper was reduced in the absence of microbial activity. At the end of each experiment, both electrodes were characterized by means of a comprehensive suite of chemical and microbiological analyses, evidencing a highly selected microbial community competent in the biodegradation of toluene in the anodic biofilm, and a uniform electrodeposition of spherical Cu2O nanoparticles over the cathode surface.

Metagenomics revealing biomolecular insights into the enhanced toluene removal and electricity generation in PANI@CNT bioanode.

Microbial fuel cells (MFCs) have significant potential for environmental remediation and energy recycling directly from refractory aromatic hydrocarbons. To boost the capacities of toluene removal and the electricity production in MFCs, this study constructed a polyaniline@carbon nanotube (PANI@CNT) bioanode with a three-dimensional framework structure. Compared with the control bioanode based on graphite sheet, the PANI@CNT bioanode increased the output voltage and toluene degradation kinetics by 2.27-fold and 1.40-fold to 0.399 V and 0.60 h-1, respectively. Metagenomic analysis revealed that the PANI@CNT bioanode promoted the selective enrichment of Pseudomonas, with the dual functions of degrading toluene and generating exogenous electrons. Additionally, compelling genomic evidence elucidating the relationship between functional genes and microorganisms was found. It was interesting that the genes derived from Pseudomonas related to extracellular electron transfer, tricarboxylic acid cycle, and toluene degradation were upregulated due to the existence of PANI@CNT. This study provided biomolecular insights into key genes and related microorganisms that effectively facilitated the organic pollutant degradation and energy recovery in MFCs, offering a novel alternative for high-performance bioanode.

Boosting Gas-Phase TiO2 Photocatalysis with Weak Electric Field Strengths of Volt/Centimeter.

Among semiconductor nanomaterials, titanium dioxide is at the forefront of heterogeneous photocatalysis, but its catalytic activity greatly suffers from the loss of photoexcited charge carriers through deleterious recombination processes. Here, we investigate the impact of an external electric field (EEF) applied to conventional P25 TiO2 nanopowder with or without Au nanoparticles (NPs) to circumvent this issue. The study of two redox reactions in the gas phase, water splitting and toluene degradation, reveals an enhancement of the photocatalytic activity with rather modest electric fields of a few volt/centimeters only. Such an improvement arises from the electric-field-induced quenching of the green emission in anatase, allowing the photoexcited charge carriers to be transferred to the adsorbed reactants instead of pointless radiative recombinations. Applying an EEF across a trap-rich metal oxide material, such as TiO2, which, when impregnated with Au NPs, leads, respectively, to 12- and 6-fold enhancements in the production of hydrogen and the oxidation of toluene for an electric field of 8 V/cm, without any electrolysis, is a simple and elegant strategy to meet higher photocatalytic efficiencies.

Olea europaea L. leaf extract mitigates pulmonary inflammation and tissue destruction in Wistar rats induced by concurrent exposure to noise and toluene.

This study aimed to investigate the effects of combined exposure to noise (85 dB(A)) and inhaled Toluene (300 ± 10 ppm) on rat lung health. It also aimed to assess the potential therapeutic effects of Olea europaea L. leaves extract (OLE) (40 mg/kg/day) using biochemical, histopathological, and immunohistochemical (IHC) analyses, as well as determination of pro-inflammatory cytokines (TNF-α and IL-1ß), and in silico Docking studies. The experiment involved forty-two male Wistar rats divided into seven groups, each exposed to a 6-week/6-hour/day regimen of noise and Toluene. The groups included a control group, rats co-exposed to noise and Toluene, and rats co-exposed to noise and Toluene treated with OLE for different durations. The results indicated that noise and Toluene exposure led to structural damage in lung tissue, oxidative harm, and increased levels of pro-inflammatory cytokines (TNF-α and IL-1ß). However, the administration of OLE extract demonstrated positive effects in mitigating these adverse outcomes. OLE treatment reduced lipid peroxidation and enhanced the activities of catalase and superoxide dismutase, indicating its anti-oxidant properties. Furthermore, OLE significantly decreased the levels of pro-inflammatory cytokines compared to the groups exposed to noise and Toluene without OLE treatment. Moreover, the in silico investigation substantiated a robust affinity between COX-2 and OLE components, affirming the anti-inflammatory activity. Overall, our findings suggest that OLE possesses anti-inflammatory and anti-oxidative properties that mitigate the adverse effects of concurrent exposure to noise and Toluene.

Spatial interfacial heterojunctions of TiO2 for photocatalytic degradation of toluene: Effects of interface amorphous region and oxygen vacancy.

The catalytic activity of TiO2 is contingent upon its crystal structure and the optoelectronic properties associated with defects. In this study, a one-step method was used to synthesize TiO2 with a spatial interface of rutile/anatase phases, and a simple thermal annealing process was applied to optimize the amorphous regions and oxygen vacancies at the interface between the rutile and anatase phases of TiO2. High-resolution transmission electron microscopy (HRTEM) elucidates the evolution process of the amorphous domain at the interface, skillfully introducing oxygen vacancies at the heterojunction interface by modulating the amorphous domain. The obtained photocatalyst (TiO2-350 °C) after annealing exhibits an optimal interface structure, with its photocatalytic activity and stability in degrading toluene far superior to P25. Photocurrent and photoluminescence (PL) measurements affirm that the existence of interfacial oxygen vacancies heightens the efficiency of electron transfer at the interface, while surface oxygen vacancies significantly enhance the stability and mineralization rate of toluene degradation. The improved photocatalytic properties were attributed to the combined effects of surface/interface oxygen vacancies and spatial interface heterojunctions. The one-step synthesis method developed in this work provides a novel perspective on combining spatially interfaced anatase/rutile phases with surface/interfacial oxygen vacancies.

Biochar enhanced the stability of toluene removal in extracted groundwater amended with nitrate under microaerobic conditions.

Groundwater pollution caused by the leakage of petroleum and various fuel oils is becoming a serious environmental problem. In this study, carbon-based materials including biochar and hydrochar were applied to investigate the effects of additives on the toluene removal in the extracted groundwater under microaerobic condition with the addition of nitrate. Biochar and hydrochar could adsorb toluene, and thus enhance the toluene removal in the system. The toluene removal efficiency was 8.2-8.9 mg/(g·h) at the beginning, and then decreased with time in the control and the hydrochar treatment, while it remained the stable values in the biochar treatment, owing to the fact that biochar could reduce the NO3--N loss by partial denitrification. Moreover, biochar could prompt the growth of toluene-degrading bacteria including Thauera, Rhodococcus, Ideonella and Denitratisoma, which had the capability of denitrification. However, hydrochar could stimulated the growth of denitrifiers without toluene-degrading capacity including Candidatus Competibacter and Ferrovibrio, which might play a key role in the partial denitrification of the system. The findings are helpful for developing remediation techniques of contaminated groundwater.

Streamlined synthesis of iron and cobalt loaded MCM-48: High-performance heterogeneous catalysts for selective liquid-phase oxidation of toluene to benzaldehyde.

Hydrothermal synthesis of MCM-48 molecular sieves featuring the incorporation of both iron and cobalt with Si/M ratios of 20, 40 and 80 (where M represents either iron or cobalt) was performed using tetraethyl orthosilicate as the silica source and cetyltrimethylammonium bromide as a template. To gain a comprehensive understanding of the synthesized materials, these were thoroughly characterized using various techniques, including XRD, XPS, UV-Vis (DRS), FT-IR, N2 adsorption-desorption analysis, SEM with EDX, TEM, TGA and NH3-TPD analysis. XRD analysis revealed the presence of well-ordered MCM-48 structure in the metal-incorporated materials, while XPS and UV-Vis DRS confirmed the successful partial incorporation of metal ions precisely in their desired tetrahedral coordination within the framework. To assess their catalytic performance, we studied the activity and selectivity of these catalysts in liquid phase oxidation of toluene using tert-butyl hydroperoxide as the oxidant. Under optimized conditions, employing a 6% (w/w) Fe-MCM-48 (40) catalyst and maintaining a toluene to oxidant molar ratio of 1:3 at 353 K in a solvent-free environment for 8 h, the oxidation reaction resulted in the formation of benzaldehyde (88.1%) as the major product and benzyl alcohol (11.9%) as the minor product.

Climatic conditions and concentrations of BTEX compounds in atmospheric media.

Climatic and meteorological conditions are among the factors affecting the ambient concentrations of BTEX compounds. This systematic review and meta-analysis aimed to interrogate the seasonal effect of climatic conditions on the concentrations of BTEX compounds. Three electronic bibliographic databases including Scopus, PubMed, and Web of Science were systematically searched up to November 14, 2023. The search algorithm followed PRISMA guidance and consisted of three groupings of keywords and their possible combinations. For various climatic conditions, the overall mean and 95% confidence interval (CI) of effect size related to BTEX concentrations were calculated using a random-effect model. In total, 104 articles were included for evaluation in this review. BTEX ambient concentration was higher in winter (ranging from 36 out of 79 relevant studies for xylene to 52 out of 97 relevant studies for benzene) followed by summer and autumn. For humidity conditions, the highest exposure values for BTEX were detected for rainy weather (ranging from 3 out of 5 relevant studies for toluene and xylene to 4 out of 5 relevant studies for benzene and ethyl benzene) compared to dry conditions. The pooled concentration (µg/m3) of benzene, toluene, ethyl benzene, and xylene were computed as 2.61, 7.12, 2.21, and 3.61 in spring, 2.13, 7.53, 1.61, and 2.75 in summer, 3.04, 9.59, 3.14, and 5.50 in autumn, and 3.56, 8.71, 2.35, and 3.91 in winter, respectively. Moreover, the pooled concentrations (µg/m3) of BTEX were measured as 2.98, 7.22, 1.90, and 3.03 in dry weather and 3.15, 6.30, 2.14, and 3.86 in rainy or wet weather, respectively. In most seasons, the ambient concentrations of BTEX were higher in countries with low and middle incomes and in Middle Eastern countries and East/Southeast Asia compared to those in other regions (P < 0.001). The increasing concentrations of BTEX in winter and autumn followed by the summer season and during rainy/wet weather appear to be reasonably consistent despite variations in study methods, quality, or geography. Therefore, it is recommended that more serious control measures are considered for decreasing exposure to BTEX in these climatic conditions.

Graphene-Wrapped ZnO Nanocomposite with Enhanced Room-Temperature Photo-Activated Toluene Sensing Properties.

Graphene-wrapped ZnO nanocomposites were fabricated by a simple solvothermal technology with a one-pot route. The structure and morphology of these as-fabricated samples were systematically characterized. The adding of graphene enhanced the content of the oxygen vacancy defect of the sample. All gas-sensing performances of sensors based on as-prepared samples were thoroughly studied. Sensors displayed an ultrahigh response and exceptional selectivity at room temperature under blue light irradiation. This excellent and enhanced toluene gas-sensing property was principally attributed to the synergistic impacts of the oxygen vacancy defect and the wrapped graphene in the composite sensor. The photo-activated graphene-wrapped ZnO sensor illustrated potential application in the practical detection of low concentrations of toluene under explosive environments.

Occupational exposure to organic solvents and risk of bladder cancer.

BACKGROUND: Bladder cancer has been linked to several occupations that involve the use of solvents, including those used in the dry-cleaning industry. OBJECTIVES: We evaluated exposure to solvents and risk of bladder cancer in 1182 incident cases and 1408 controls from a population-based study. METHODS: Exposure to solvents was quantitatively assessed using a job-exposure matrix (CANJEM). Exposure to benzene, toluene and xylene often co-occur. Therefore, we created two additional sets of metrics for combined benzene, toluene and xylene (BTX) exposure: (1) CANJEM-based BTX metrics and (2) hybrid BTX metrics, using an approach that integrates the CANJEM-based BTX metrics together with lifetime occupational histories and exposure-oriented modules that captured within-job, respondent-specific details about tasks and chemicals. Adjusted odds ratios (ORs) and 95% confidence intervals (95% CI) were estimated using logistic regression. RESULTS: Bladder cancer risks were increased among those ever exposed to benzene (OR = 1.63, 95% CI: 1.14-2.32), toluene (OR = 1.60, 95% CI: 1.06-2.43), and xylene (OR = 1.67, 95% CI: 1.13-2.48) individually. We further observed a statistically significant exposure-response relationship for cumulative BTX exposure, with a stronger association using the hybrid BTX metrics (ORQ1vsUnexposed = 1.26, 95% CI: 0.83-1.90; ORQ2vsUnexposed = 1.52, 95% CI: 1.00-2.31; ORQ3vsUnexposed = 1.88, 95% CI: 1.24-2.85; and ORQ4vsUnexposed = 2.23, 95% CI: 1.35-3.69) (p-trend=0.001) than using CANJEM-based metrics (p-trend=0.02). IMPACT: There is limited evidence about the role of exposure to specific organic solvents, alone or in combination on the risk of developing bladder cancer. In this study, workers with increasing exposure to benzene, toluene, and xylene as a group (BTX) had a statistically significant exposure-response relationship with bladder cancer. Future evaluation of the carcinogenicity of BTX and other organic solvents, particularly concurrent exposure, on bladder cancer development is needed.

Study on the Catalytic Oxidation of Toluene Using CeO2@S-AZMB Prepared from Spent Zn-Mn Batteries.

The recycling and utilization of waste alkaline zinc manganese batteries (S-AZMB) has always been a focus of attention in the fields of environment and energy. However, current research mostly focuses on the recycling of purified materials, while neglecting the direct reuse of waste batteries. Here, we propose a new concept of preparing thermal catalysts by combining unpurified S-AZMB with CeO2 by means of ball milling. A series of characterizations and experiments have confirmed that the combination with S-AZMB not only enhances the thermal catalytic activity of CeO2 but also significantly enhances the concentration of surface oxygen vacancies. In the toluene removal experiment, the temperature (T90) at 90% toluene conversions of CeO2@S-AZMB was 180 °C, lower than the 220 °C for CeO2. More noteworthy is that this S-AZMB-based thermal catalyst can maintain a good structure and thermal catalytic stability in cyclic catalysis.